MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Will these valve covers work on EFI? (http://forums.mustangworks.com/showthread.php?t=23954)

Bad89stang 05-19-2002 12:00 AM
Will these valve covers work on EFI?
 
1 Attachment(s)
This guy sells these on Ebay all the time. They have a baffle under the fill hole, but I am unsure if they will cause problems. Will this let too much unmetered air into the valvetrain? Could I use a plug or special breather to make them work? Let me know if any of you guys are using something similar. Thanks.

Bad89stang 05-19-2002 10:46 AM
TTT

Green9550 05-19-2002 12:15 PM
I don't see why they wouldn't. Take care.

-Billy

chris91LX 05-19-2002 12:18 PM
It would depend on the height of the vc. I had to cut the baffle out of my stock vc's to make them fit w/ the rr's, but they fit fine now. If these are at least the same height as the stockers you should be fine, if they are not they won't work.


All times are GMT -5. The time now is 04:30 AM.