94 GT brakes? will they work?
 

i just bought a set of front brakes from a 94 GT. i have the spidles, the question is i want to run with my drums in the rear(temporarily) and use the 94 GT brakes up front so i can use my 99 Cobra wheels that have been sitting in my basement for ages. so can i just "bolt" the front up without changing anything? i.e. master cylinder\proportioning valve. would this work?

yes all you need to do is swap the spindles calipers & rotors you will need spacers for the balljoint or the 94 piece pressed in and i used the maximum motorsports steelbraided braklines they bolted up perfect but i have been told you can use the soft lines from the sn95 front end but yours wont work are you using the ranger drums in the rear if so that was a pretty easy swap good luck hope i helped and have fun

i have ranger drums. i have everything you listed, now what wont work? i didnt understand you. repeat please. thanks

your stock fox front soft brake lines will not bolt to the sn95 calipers i used maximum motorsports steel braided lines

http://www.nomotivation.com/5lug.cfm

i dont know if youve been here or not but this site helped me alot

i have the used sn95 brake hoses already. just have to change the fitting. i have the tools and i flared hundreds of brake lines. no sweat.

yes. that is what i was looking for! i guess i will bolt them on for now! next...COBRA BRAKES.... :D

THANKS CHATCHER!