MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Advice on custom cam companies (http://forums.mustangworks.com/showthread.php?t=2439)

gt93mustang 04-17-2001 09:30 AM

Advice on custom cam companies
 
I am going to be installing a Procharger soon and want to get a good custom cam to compliment the new setup. Can anyone give me suggestions as to which companies would be the best place to start looking for a custom, smog legal, blower cam for the best price. Thanks in advance.

------------------
MAC equal length headers, MAC Off-Road H-Pipe, Flowmaster mufflers, 373's, March ram-air kit, underdrive pulleys, 73mm MAF, 75mm TB, Saleen Intake (ported), Edelbrock 6037 heads (ported, polished, 3 angle valve-job 255CFM @.500), 1.6 FMS RR's, Wolverine 1087 Cam, 24lb injectors, MSD 6AL, Subframe connectors, Griggs Adustable Lower Control Arms, Lakewood 50/50 shocks, SSM Upper Control Arms... and probably some more in there I forgot

Rick 91GT 04-17-2001 12:59 PM

Well I went to Rick Anderson for my NA cam as you already know but, "musmondo" insist on Comp Cams tech. He runs that monster XX trim and has has awesome sucess with them he has a contact there he uses, get at him on the chat board.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

musmondo 04-17-2001 02:28 PM

I will be on the board later tonight stop in and we'll have a talk and see what you are looking for i'll try to help and if I can't then I might know someone that will.

------------------
93GT,blown,too much to list

gt93mustang 04-17-2001 03:39 PM

As usual, you guys come through again! I appreciate the help and will see you tonight in the chat room. Thanks!

Rick 91GT 04-17-2001 04:05 PM

No Problem http://www.mustangworks.com/msgboard/wink.gif

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!


All times are GMT -5. The time now is 06:01 AM.