MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   decent gear, decent price? (http://forums.mustangworks.com/showthread.php?t=2441)

poopstang 04-14-2001 03:51 PM

decent gear, decent price?
 
Does anybody know of a decent off-brand gear for less than 200 bones?

xspeed02 04-14-2001 04:07 PM

Last time I checked Motorsport SVO gears were around $189.

------------------
Team Xspeed Leader/Co-Founder
1990 Black Mustang GT 5spd
Current Mods: 2 1/2 Offroad H-Pipe, Borla Cat-Back Exhaust, 91-93 5 Star Pony Wheels, K&N Filter, Free Mods, Pioneer Headunit, MB Quartz Speakers, Orion Xtreme 300 Amp, 2 JL Audio W0's, 130 Amp Alternator, 3.73's
Future Mods: Engine rebuild with Trickflow Heads, GT-40 Intake, Custom Ground Cam, and 14lb ATI Procharger!
AIM=xspeed02


poopstang 04-14-2001 11:07 PM

anything besides Motorsport?

84stangLX 04-15-2001 02:29 AM

I think i saw an ad before by national drivetain about 3 or 4 months ago for gears like an insane low price like $139 or less. The site is www.natldrivetrain.com, i just checked the address, but the page isn't coming up. They have advertisements in several offroading magazines, and i think maybe also in Muscle Mustangs and Fast Fords.

poopstang 04-15-2001 01:17 PM

anybody used Pro 5.0 gears?

TEXSN95 04-15-2001 01:46 PM

Why dont you want to use motorsport gears??

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW lower control arms, Steeda CC plates, aluminum driveshaft, Steeda quadrant, MSD6A, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 104.7 w/ 2.22

poopstang 04-16-2001 03:55 PM

i kinda have a budget, i'm a student

TEXSN95 04-16-2001 04:50 PM

It was stated earlier that motorsport gears were $189 and I've seen them as low as $169 or so. $189 < $200.

------------------
Clint L.
White 95 Cobra #3637
58cc GT40X heads with mild porting, Crane 2031 cam, FRPP 65 TB, 1.7s, Cobra intake, homeade cold air, 155lph, pullies, Tokico Illuminas, C springs, GW lower control arms, Steeda CC plates, aluminum driveshaft, Steeda quadrant, MSD6A, Mac shorties, off road hpipe, 2 1/2 ultra flows w/ dumps, R hood, Euro clear corners, stock 3.08s
13.61 @ 104.7 w/ 2.22

91LXConv 04-16-2001 05:11 PM

Best place to get new gears for cheap is at a Mustang show or the like. Check around and see if there's one coming anywhere near you. I got mine for $140... best part is no shipping!

------------------
1991 LX 5.0 Convertible:
AOD w/ shift kit, 3-piece Steeda chassis stiffening kit, 4-pt. roll-bar, 3.73s, K&N, MAC shorties and cat-backs, bad-ass Firestone SZ50EP tires (225/55 16). Underdrive pullies and white face guages coming.

Mad Horse 04-16-2001 09:53 PM

I agree with 91LXConv. I got my FMS gears at the Columbus Swap for $150.00. If I can get a hold of a friend I know he knows of a place that sells them for $150.00 every day. I'll post it if I can get a hold of him.

------------------
88GT 5-speed
Mods: Cervinis Ram air hood 3.73 gears, King Cobra clutch, Pro 5.0, March alum. Pullies, DynoMax Cat-back, K&N, 9mm plug wires, PS91 coil, Accel Cap/Rotor, 190lph Fuel pump, 16" Ponies.
"Nip it in the Bud"
My Webpage

Chris_H 04-17-2001 12:22 AM

You can get a set of new Motorsport gears for $149 from Diversified Products Marketing. Not sure how good of a company they are but if you have the May 2001 Issue of 5.0 & Super Fords go to page 40. Hope this helps.

Chris

StreetStang37 04-17-2001 03:33 AM

If you can't afford $170 for some gears, think about the money you'll spend on the extra gas too. Don't get me wrong, I think $30+ is a nice chunck of change to save, but if $30 is that a big of deal then maybe you should wait on it and see if you can afford the big picture. Just a thought, not meant to be a flame or put you down.

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Super Competition Hooker Headers, 2 1/2 in. mandrel bent cat back, High Flow H-Pipe, Pro 5.0 Shifter, 16* Timing Advance

poopstang 04-17-2001 04:20 PM

thanxs guys for the info.


All times are GMT -5. The time now is 02:19 PM.