mass air
 

i ordered a mass air, but i think i got the wrong one. it said 5.0 cobra for 24lbs injectors. However, i think it is for the 93. can i use this on my 94, or do i need to get a different one?

I could be wrong but as far as I know it should work if you have 24lb injectors. If it fits give it a try. I don't think there was any huge differences in the computer between 93-94.

actaually, there was quite a bit of difference between the 93-94 computers, at least according to Pro-M, who makes a retrofit computer conversion kit for the 94-95's that they claim makes a lot more power using the older computer.

the directions were not very good, but from what it looks like i think i can get it to fit if i remove my cold air induct. Would it be worth it to do that, or am i just better sending it back and using the money on something else?

why do you think its for a 93'? Is the air filter mount different?

the air filter mount is different and it doesnt look like it will fit the way it should...i might be able to move some stuff and fit it in though

send it back and get the right one. Install your old one untill the correct one arrives. Not a problem.

What he said.

Take care,
-Chris

If you still have the stock computer you should get the mass calibrated for 19# injectors. I would get the prom 77mm. jmo
Ray

I disagree. Considering he has a 94 Cobra, which came stock with 24 lb. injectors, that is not true.

Okay let's stop right here and get our facts straight. When you order a mass air for a 94cobra(mak375's car) he will have to tell them that it is a stock computer car with the 24# injectors. They will then send you a meter that says something like cobra and 19# injectors. This is right. You need a 19# calibrated meter for a stock cobra. The meter and injectors are not matched like other cars. There is a good article on this site that gives alot of info on mass air.
http://www.mustangworks.com/articles...tionBlues.html

Ray