MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   mods (http://forums.mustangworks.com/showthread.php?t=24742)

fasteddie 06-06-2002 07:45 PM

mods
 
i just put 24 lb. injectors,granitelli mass air sensor and gt 40 intake on and my car runs like crap.whats up???? stock heads and cam,65mm throttle body bbk cool air jet chip.ant help would be helpful!!!!!!!!!!!!!!!!!!!!!

95 gt 5.0 aode tranny

Mr 5 0 06-06-2002 08:07 PM

New mods, new headaches
 
1. You may have a vacuum leak on the GT40 intake installation.

2. The Granatelli Mass Air sensor may just be too big for your application (stock heads & cam).

3. Is the new Mass Air sensor calibrated for 24-lb injectors? If not, that's your problem.

4. You don't need 24-lb injectors.

RPM427 06-06-2002 08:10 PM

you are OVERINJECTED!!!

if your car is NA, then 24's r too much for stock heads/cam. If u have made some changes and your car is making more power u can raise the fuel pressure to get more fuel, but u r running way too rich now. you should go back to the 19's or lessen the fuel pressure. Make sure your MASS airflow sensor is calibrated to 24's or its not going to run right.

fasteddie 06-06-2002 08:34 PM

thanks guys
 
well i guess i should know by now not to believe everything you see in jegs.i hope the intake works because of the seperate tubes my car slows down when intake is hot.big trouble in late rounds!!!!!!!!!!!!! but i will go back to 19 injectors and stock mass air.

Bad89stang 06-07-2002 02:11 AM

There is no need to switch back to 19's. Just make sure everything else jives and you will be good to go. Keep the 24's... they will be extra insurance when you get some heads.


All times are GMT -5. The time now is 06:44 PM.