Tranny Gears??
 

What happens to be the gears on a T-5,T-10,C-4, and AOD?? I'm trying to figure out what would be the best tranny for an older mustang that is under construction. Thanx and any information will be greatly appriated.

------------------
67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, manley valves, v-matic hurst shifter, edelbrock performer nitrous, carter electric fuel pump, ignitor coil, solid motor mounts, magna racing suspension, poly urathane bushings, und

???

Are you looking for ratio's?

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Super Competition Hooker Headers, 2 1/2 in. mandrel bent cat back, High Flow H-Pipe, Pro 5.0 Shifter, 16* Timing Advance

If that's so, then:

T5
1st...3.35
2nd...1.99
3rd...1.33
4th...1.00
5th...0.675

Don't quote me on those, but I think those are it. The C-4 and AOD have the same ratio's except the AOD has a 4th gear overdrive.

AOD
1st...2.47
2nd...1.47
3rd...1.00
4th...0.667

If the T-10 is anything like an SROD then:

SROD
1st...3.07
2nd...1.72
3rd...1.00
4th...0.70

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Super Competition Hooker Headers, 2 1/2 in. mandrel bent cat back, High Flow H-Pipe, Pro 5.0 Shifter, 16* Timing Advance

Okay, I found the T-10 numbers. They have 4 different set of numbers for them.

T-10
1st....2.43....2.64....2.64....2.88
2nd....1.61....1.75....1.60....1.91
3rd....1.23....1.34....1.23....1.33
4th....1.00....1.00....1.00....1.00

I hope those were the numbers you were looking for.

------------------
1993 Mustang GT - March Ram Air & Pullies, K&N, C&L 73mm MAF, Super Competition Hooker Headers, 2 1/2 in. mandrel bent cat back, High Flow H-Pipe, Pro 5.0 Shifter, 16* Timing Advance

Thank's for the info! Those were the number the numbers I was looking for. Thank's again. http://www.mustangworks.com/msgboard/biggrin.gif

------------------
67'fastback- Edelbrock carb, intake, cam, valve springs. Road lifters, Comp Cam rocker arms, windage tray, cerama coated headers, dual flows with H-pipe, modded c-4, tci stall converter, perma cool electric fan, aluminum water pump, griffen aluminum radiator, accel 8.8 cable, wide cap distriburator, magnetic pick up, manley valves, v-matic hurst shifter, edelbrock performer nitrous, carter electric fuel pump, ignitor coil, solid motor mounts, magna racing suspension, poly urathane bushings, und