MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   enough fuel for blower? (http://forums.mustangworks.com/showthread.php?t=24788)

Skywalkr57 06-08-2002 10:48 AM

enough fuel for blower?
 
im looking to get a S/C with a small amount of boost (probably 6lbs) looking at my current fuel setup do you think i have enough to power that, plus id probably get an fmu. how much to people usually gain from 6lbs? 60-70hp depending on combo? thanks
~matt

Skywalkr57 06-08-2002 10:51 AM

also, does my cam work well with superchargers? i believe its got the same specs as the f303

91GTturbo 06-08-2002 11:41 AM

With your current setup you should be just fine, although you will definately need the fmu. I suggest trying to find some 30's, because with a blower you can never have enough fuel. As far as your hp estimates, your about right on. As far as the cam, I know the f cam makes a good supercharged cam, so you should be fine there too.

Skywalkr57 06-11-2002 01:36 PM

any guesses what id run with 6#'s, my combo and traction?

91GTturbo 06-11-2002 04:16 PM

I'd say mid to low 12's with some traction.

1995MGTS 06-12-2002 02:42 PM

No sure what's in a Holley Systemax I package but when I was running my Powerdyne with only 6lbs of boost (only saw 4.5psi), 24# injectors, and the rest of the mods in my sig, I made 380.7rwhp/367.9rwtq SAE corrected. On a not so nice day (hot nasty day), I ran a best of 13.48@111.7 :(


All times are GMT -5. The time now is 08:23 PM.