MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   need help (http://forums.mustangworks.com/showthread.php?t=25127)

jaysshelby78 06-16-2002 05:58 PM

need help
 
what oil pans will fit on a 86 mustang will one from a 81 ford truck work both are 302, also what tranny works ain this car (auto) and what is the lenth of the tranny, will a truck tranny work?

LX5liter 06-17-2002 08:28 AM

Hi Jason,
I don't think the truck pan will work. The Mustang pan has a big dip in it to clear the k-frame and rack which the truck pan won,t have. You'll have to find a pan and oil pick-up off a mustang 5.0. The tranny should fit, probably a C-4, but you will have no O.D. and you may have to get a custom length driveshaft, and an aftermarket shifter.
I'm sure some more guys will pop up with more knowledge on the subject than myself.

DRASTiK 06-17-2002 10:02 AM

I've got an oil pan off of an 85 GT. It's just collecting dust in my garage. It's double sumped and I don't think you'll have any problems with it fitting in your 81. If you need it, just let me know.

As far as the tranny, if you go with the C-4, depending on the balance of the 302 in it, you may have to get an aftermarket flexplate as well. If it's an HO 302, then you will need a flexplate to fit the C-4 that's ballanced for the HO. If it's not an HO (28oz), then the factory flexplate for a C-4 will work fine.

B&M makes an aftermarket one you can buy from Summit for around $100.

Dave


All times are GMT -5. The time now is 09:29 AM.