sloppy doors
 

when I open the drivers door it drops almost half an inch
can I get new bushings for the hinges or would I need new hinges?

get a hardware kit, which comes with bushings and pins from a parts store.

take care,
adam

Exactly.

Take care,
-Chris

I need to do this as well. I've heard its a little tough to get in there, but well worth it in the end.

Door hinge repair
 

ConMan:

Buy the pin/bushing door hinge 'repair' kit. About $10. per side.

You need a dremel tool to cut the old pin(s) as they don't just slide out. It's tight and takes some time to do this. Having a friend to hold the door when you remove the old pin(s) and insert the new ones helps a lot.

I did it about 2 years ago, with a friend's help. Took a little over an hour (I only needed drivers door hinge repaired) and no problems since. Looks better, too.

thanks for the info
I was looking at the hinge setup and was wondering how it came apart

My car is the same, only needs the drivers door
I guess that one opens a lot more than the pass. side.