please help fast!!!! not good!!!
 

i was changing the radiator fluid today and Tstat, i got everthing done put the car back together and it leaks from the neck now and i also have coolant coming from thos two small holes in the waterpump one on top of pump and one on the under side of pump what the hel# is going on??

Had the same thing happen to me. Theres tow things that could have happen, either you put the gasket on the wrong side or the thermostate slid out of the grove in the housing causing it to leak. Good Luck.

------------------
87 GT, 4 inch cowl hood,17x9 Cobra R's/255/45's,GT-40 heads,long tubes headers,h-pipe,Flows,BBK cold air, Mass air,70mm MAF, 1.7's, 1" spacer,underdrive pulleys,Pro 5.0, King Cobra, Adj. fuel Reg., Lakewood Lift Bars,50/50's,subframes, 4.10's.
Best time 12.96
Best MPH 103.42
Best 60' 1.695

Visit my site at:
http://www.geocities.com/cobrar93_2000/MyPage.html

thaks for the help!but do you know why i am leaking out of the water pump??????????

I doubt it's out the pump. It just might look like that because it's seaping threw.

well i can plug up one one weep hole on the bottom of the pump and then it starts to come out of the top one. ?????

I agree with it might be the Thermo slid and it crushed outside the groove on the housing, If you take it out add a little gasket sealer and then put a new gasket on , let it sit for 15mins or so to let it set-up then install it. If it is leaking out the weep holes on the pump the water pump is bad, I would suggest a Stewart Componets high flow pump it works great for me. $69.00 non-polished $89.00 polished.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

oops

------------------
ICQ# 42269241
Indiana Stangers Association
Buy your parts here

[This message has been edited by 2FastLX (edited 04-22-2001).]

thanks for the help!!, hey where can i order that pump from(stewart high flow) can i find it in M/Mustangs or a summit catalog???

They usually have ads in MM&FF. Nice guys to deal with and they wrok very nicely. I'm at work right now or I'd give you the number, if you can't find it let me know I'll pull out my invoice at home.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!