Belt Size???
 

Does anybody know what size belt I should
run? I have no A/C,P/S,or airpump. My alt, waterpump are stock along with all my pulleys (crank also). I also have the stock alt. bracket and tensioner set-up.

Thanks Guys/Gals

This is a Dayco # 5060445. I think 44.5" long. I ran this with the set-up you are talking about. Should also work with UD pullies.

Keep in mind the WP should be a clockwise spinning pump. Your 88 will be counter-clockwise. Unless you have the idler pulley on the dr. side of the motor, then dis-regard all info.

My set-up is three pullies and alt. idler arm. The tensioner is very close to it's limits, but it works fine.


------------------
82 Mercury Capri 302.
Comp. Cams
Tremec 3550
3.73's
12.8@106 N/AKevin's Capri



[This message has been edited by shovelnose (edited 04-24-2001).]