![]() |
Max HP With Stock Block(302)?
1 Attachment(s)
Has anyone exceeded the treshold?
|
600 fwhp is the magical number I here thrown around alot. Once there, your on borrowed time.
|
I have heard 600fwhp quite often. I have also heard of guys putting down 750 with many 1/4 pass's..
I will be finding out soon after I install the P1SC on top of my 347.. |
Keep it tuned tick tock tick tock
Yeaqrs ago Jimmy LaRocca,made 750hp with a stock block with a R-trim Vortech he went 9.54@144mph and the motor lasted an entire season yeah it had JE pistons but the block was stock.
I say keep a safe tune on it,girdle it,good rods,pistons,ignition the hole 9 and keep the power level sane,I would say a good tune,girdle,and good pistons I think you can make 650,but as the opening line says "tick,tock,tick,tock" lol May the force be with you. |
tick, tock, tick, tock, tick, tock, tick, tock, tick, tock, tick, tock
I run a stock block 306 with the whole 9 and I'm working on getting a 200 shot dialed in... 400fwhp + 200hp N20... I heard that you can get 650fwhp out of one, hmmm... My kit goes to 250... tick, tock, tick, tock, tick, tock:D
I just hope to see some 10.20's before this fall... or the block splits in half... which ever comes first:rolleyes: |
Yeah, its just north of 600hp. I know because my brothers makes north of 700hp and we blew a nice chunk out the side of the block. Do a search (Street Racers Corner)about 2 months ago if you want to find out how we blew it.
|
needs a girdle...don need those caps walking..ive blown up 4 motors without one..one of them was just driving around the block
|
A friend of mine blew up his stock block with 513hp on the ground. BTW, it did have an SVO stud girdle on it too.
|
Any Block can break
Before we start knocking stock blocks too bad,I have seen A4's break,and R302's with holes in the side of them.
I will relate anything mechanical to this statement"If Man Can Make It, Man Can Break It". I will also say it takes a lot more to break an A4 block or R302 block,but break is break. Tune,good forged internals,stud girdle,and one bullet because you are playing Russian Roullette everytime you drop the hammer. tick,tock,tick,tock,tick,tock |
All times are GMT -5. The time now is 03:23 AM. |