MAF recalibration
 

Does anyone know where I can get a 19lbs/hr sample tube for a 76mm C&L MAF meter? Brothers performance sells the 24 and 30, but i don't see the 19's. I am pretty sure it has a 24lbs tube in there now, it has a blue marking if that helps.

If I put 24 lbs on there now, (285 hp NA), what FP should I run them at?

i run 35-36 fuel pressure (vac off) with 24# injectors with the combo in the sig

you can get the sample tubes from anywhere that sell c&L meters. i would give a call because people usually dont go down in sizes for sample tubes so they dont really advertize 19 # sample tubes. i had to call around for one for my friend.

take care,
adam

Do you know how much power you are making? Ever take it to the track? If so, What was your 1/4 mile MPH?

I just called Brother performance and they don't carry tubes for 19's, only 24 and 30's. I think I will tell my friend to get the 24lbs now. I will just have to lower the fuel pressure a little. The EEC will also compensate by shortening the pulse width of the injectors.