AOD to T5 Conversion
 

Okay I know this has been asked before.... But do you guys know any good sites that have a list of all the parts I need. ( I mean like all...small, small parts) So far I've got a Tranny, bellhousing, clutch, pedal assembly, flywheel, shifter boot lined up.... what else am I going to need? Thanks all!

T-5 Transmission
T-5 Clutch Fork - 86-93
1987-1993 Pedal Assembly
Aluminum Foot Pedals
Bellhousing
Clutch - 10 1/2"
Flywheel - for 10 1/2" Clutch
Flywheel Bolts
Transmission to Block Plate
Shifter
Shift Boot, Knob, Handle, Noise Barrier Weather Boot Gasket
Clutch Quadrant and Adjuster
Clutch Cable
T-5 Backup Wire Harness
Speedometer Gear to match your Gears
Pilot Bearing
Bellhousing Bolts (You can only use 2 of your AOD ones)
Pressure Plate Bolts
Clutch Cable Retainer Clip
Replacement T-5 Tail Shaft Seal
Steel Bearing Retainer
Aluminum Drivesaft (Optional)

Some of the stuff will be sold together...but here is hte list of stuff I bought.

Thanks,
DoranW

no you can use 4 of the AOD ones, and you can use all 6 if you take up the space in the upper 2 with washers. Thats what I did in my swap.

When I get home, I'll post a link with a list of all the parts needed as well as step by step instructions on the swap.

The only thing I can see thats missing from Sonics2042's list is the automatic tranny fluid that you'll need :)

Go here:http://www.wcfords.com/articles/tech/t5swap/t5swap.html
This is the site I used for the swap.
Good Luck!!

Thanks guys, just what I was looking for!

thats the exact link that I was gonna post :)

good luck with it, it is WELLLLLL worth the work