AHHHHHH HELP QUICK AS IN NOW!!! LOL I HAV E AHOUR LEFT
 

Ok im about t re ring my enigne and buy all this crap however the people at summit need to knwo if my "ring lans"? are standard or metric. All i know is they are SRP 10:1 pistons wiht a 30 over bore. I need ot order liek nwo0 so please help.

original pistons are metric, but as I know that depends on the new pistons your getting

lito

------------------
92GT,SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, 4.10, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER

www.killersracing.com
www.clubcopa.com
http://www.killersracing.com/lito/mustanglito.jpg

Im not getting new pistons i am jsut getting the rings. What are Ring Lans? Does anyone knwo if these pistons use the metric or standard rings? How do i measure?

why don't you just call the guys
(714) 373-5530


lito

------------------
92GT,SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, 4.10, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER

www.killersracing.com
www.clubcopa.com
http://www.killersracing.com/lito/mustanglito.jpg

what guys?

sweet car by the way. What kind of rims and tires? Is the size of the roims and tires really that much of a improvement or shoudl lowering be done first?

Guys: SRP, now they are with JE, they must be standard 1/16 ..... but I'm not sure.

Wheels: Cobra R rims 17x9 5 nuts, more backspacing in the rear (the car has the M-2300K cobra 13" brake kit)

Tires: in the photo, extinct BFG R1 340 255/40/17, on the highway Pirelli's P700Z 265/40/17

------------------
92GT,SOLO RACER, COBRA BRAKES, R1 TIRES, GT40, GT40X HEADS 58CC, 24LBS, 70MM/65MM, E303, 4.10, MANY ROAD RACE MODS, CORVETTE, CAMARO, RX7 AND SUPRA SOLO EVENT EATER

www.killersracing.com
www.clubcopa.com
http://www.killersracing.com/lito/mustanglito.jpg

Your thinking of the ring lands, which i believe is the detent in the piston for the rings...i may be wrong though. I also know that everything internal in a 302 is standard, not metric.

[This message has been edited by 84stangLX (edited 04-27-2001).]