Missing Fan Shroud Bolts
 

I recently had some work done and I just noticed that the bottom bolts to the fan shroud seem to be missing. It can swing back as if the shroud is hinged at the top!

I'd like to pick up the bolts I need on my way home from work. Anybody happen to know what size bolts I need to get? Any other info is appreciated.

Thanks.

------------------
'87 5.0 LX Convertible 5-spd.

Headers, cat-back, Bilstein shocks & struts, springs, pulleys, K&N filter, full-length sub-frame, strut tower brace. Aren't these cars great?

If your running the stock shroud and radiator there are no bolts at the bottom, there is 2 clips that are snapped in the 2 slots in radiator and the shroud. Hope this helps. Maybe the clips are there but are under the shroud, check there first.

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC exhaust 1-5/8" Long tubes,2-1/2" O.R H-Pipe,2 1/2" cat back, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension,S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!

[This message has been edited by Rick 91GT (edited 04-27-2001).]

Thanks Rick...That's a big help. I'll take a look.

Paul