Bottom End
 

These are my mods to date:
World Products, Windsor JR. Heads
Crane Cam and Roller Rockers
Weiand Action Plus Intake
Holley 650 Double Pumper
Under drive pulleys
Centerforce Dual Friction Clutch
Aluminum Drive Shaft
8.8 Rear w/ 3.73's
Mac Shorty Headers and H-Pipe
Flowmaster 2 Chamber Mufflers
K&N Filter
My question is can I successfully put a 347 stroker under the top end? If not what can I do to the stock block to help performance.

Thanks.

The only thing that I would watch out for is the 58cc chambers you have. With a 347 you compresion may be to high for pump gas . A dished piston may get you down there though. Other then that get ready for stump pulling torque.

Thanks, for the response. I'll be careful with the compression it's a daily driver.