cam lift question
 

Does anyone know the stock Cam lift in the 5.0 HO....I just finished assemblig all new valve train in a set of GT40s and my valve springs are only good up to 500 lift, and I want to run 1.7 rockers.
Thanks

------------------
95 GT convertable, 3.73 gears, bbk off road h-pipe, march underdrive pullies, Saleen wires, custom made cold air induction,
Cobra intake w/ 65mm tb
GT40 heads, flowtech headers

Stock cam lift is .442. Stock rockers have a 1.59 ratio. With 1.70 ratio your lift will be .4726. You should be good to go.

------------------
88 347, Twisted wedge heads,Comp Cams 224/230 cam, 1/4=10.718 @ 123.02 mph dyno= http://www.fbody.com/members/LarryS/mustdyno.jpg

[This message has been edited by 8850 (edited 04-28-2001).]