MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   How do I change the heater blower motor? (http://forums.mustangworks.com/showthread.php?t=272)

Saleen308 01-13-2001 04:10 PM

How do I change the heater blower motor?
 
Do I have to remove the dash?

My Hanes manual makes it sound like everything can be done by going through the glove box but, I just don't see how.

My car is a 1989 with A/C too.

Darkside 01-14-2001 04:46 AM

It will come out a little tight. you can remove the 10mm bolt on the end of the dash by kick panel and bottom of dash can be pulled out a little to gain more room.

------------------
89 Notchback 347 Trick flow heads and intake bbk full length headers 3.73 Pro Charger with 3 row intercooler and much much more never enough got to go faster!!!

gtstang83 01-14-2001 10:17 AM

it all depends on if you have A/C or not.no a/c means that the heater core is in the glove box and having a/c usually means it is in the dash....it's a lot easier if it is in the glove box, so i would check there first. can also check under the hood to see if you have 2 heater hoses going to the firewall in the area of your glove box. if so, that is where you will find the core.


All times are GMT -5. The time now is 11:03 AM.