94 bronco 351 q's
 

i can get one of these for $200 this friday..i got a few questions first..
1-are the pistons forged?
2-whats the compression ratio with stock cc heads?
3-is it a 4 bolt or 2 bolt?
4-what is the HP rating on one of these
5-scence is it a roller motor can i use 5.0 roller cams in it?
6-what carb,cam, and intake do you guys recremend for this car to look upward of 400-450 HP N/A

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

if you want i can build you a nice motor with that 351. the compression is in the 8's and theyre not forged pistons. but since you want n/a you are better off. the stock heads arent that good but some port work would help. a torker intake with 700 holley dp and a good cam will make it run good. i like solid rollers but if you want to use hyd. then thats fine.the cams are the same but dont use a motorsport cam.

thanks juiceman..my buddy said he talked to you online about the motor allready..i think we will just put better pitons in it and change the bearings..the motor i would like to spray eventually..yes i would not use a motorsport cam..i was thinkg a custom or a comp cams XE series cam

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch

well were def ganna spray it now so what compression and pistons do you recremend

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..
AIM=onesillynotch