89 coupe
 

Alright guys i got an 89 coupe that right now has bbk shortys,xpipe and flow 2 chambers, a k&n, and 1.6 frpp RR's. I have a whole trick flow set up going on this winter. Track heat heads,intake, and a stage 2 cam. along with these i have 30 lb injectors, 75mm mass air sesnor 70mm TB, 190 lbh fuel pump and a fuel pressure regulator. Now i need to know what else im gonna need other than the obvious new pushrods and maybe hydraulic roller lifters.

Thanks alot
Ben

List
 

I would add an adjustable fuel pressure regulator if you don't already have one. It will give you that extra tuning ability. Everything else sounds good. Some might recommend a better ignition or at least a decent coil, but it probably isn't necessary.

What clutch/trans are you running? Also, I'd go with some 3.73's or 4.10's if you don't already have them.

Im running the stock t-5 and clutch, those will be upgraded next as i break them. I also want to start doing some suspension work, so far i only have subframe connectors. Im running 3:73's right now also.