MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Stang Stories (http://forums.mustangworks.com/forumdisplay.php?f=12)
-   -   2nd ET's with new motor (http://forums.mustangworks.com/showthread.php?t=30005)

fiveOguy20 10-11-2002 08:32 PM

2nd ET's with new motor
 
well my last ET's were 13.7's at 103 on street tires.. tonight i did much better with a best run at 13.2 at 107 :D on street tires with a 2.19 60 ft.


347, Bcam, full MSD, 1.6 crane roller rockers, pullies, equal length shorties, air-gap intake, 735 holley, 2 chamber flows, 3.27 gears

HotRoddin 10-11-2002 11:37 PM

Very good !! and with 60' times like that and 3.27 gears you have a ton of room for improvement !

Skyman 10-12-2002 09:37 PM

What heads do you have?

Skyler

Nitrous Al 10-12-2002 09:42 PM

Five0guy20 - What happened to the last motor?
Skyman - How's your car running?

fiveOguy20 10-12-2002 10:22 PM

i got the GT-40 aluminums with some port work.

it runs really good just need a gear an slicks

Skyman 10-14-2002 03:26 AM

Its running good, I really should take it back to the track agian before I finally gettin to cuttin the cage and all. Id like to look for a 10second slip once on the big shot of n20.

Skyler

Skyman 10-14-2002 03:27 AM

I would swap to a 1.72 rocker, you'll pick up 15-20rwhp.

Ive seen 12-15rwhp on a 302 w/ heads/Bcam/intake.

Skyler

Ackbar00 10-14-2002 07:35 AM

I would check something. My car has went a 109MPH in the 1/4 and its a 100,000 mi Stock short block with the stock cam. I would think with a 347 you should have a bit more MPH than 107.


All times are GMT -5. The time now is 12:31 AM.