Cylinder Head Deal
 

I have the chance to pick up the holley systemax aluminum heads for an 86-83 5.0 for a mere $500 bucks brand new in the box. It wasn't what I originally wanted but how good are these heads? will they work well with a different cam than the one they recomend? I consider .512 too much lift for a street car. Also how well do they match up to a tfs intake or edelbrock intake? Will they bolt on to an older block or will I need different push rods? Please help I don't want to pass up this opportunity if they will work.

what year/model car do you drive?

67' Fastback. I might be using a 93 Saleen engine but right now it has a 69' 302.

------------------
67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s

I would jump all over that deal even If they dont work for your motor you can always sell them and make an easy $300-400 dollars those heads are $1000 everywhere.

------------------
92'LX Notchback, BBK Fenderwall Cold Air EDELBROCK Per. Intake, C&L 73mm MAM, 70mm TB,Windsor Jr iron Heads port & polished, f303 cam, 1.6 Crane roller rockers MSD 6A, FMS 9mm wires, Underdrive pulleys, JBA headers, flowtech X, 2 ch. flow, 3.73, Pro 5.0 Shifter HD FMS Radiator, Max Motorsport subs, Max Motorsport Lower Control Arms, ...KN 12.99@106mph
60ft 1.75 w/ET Drags

I called up summit and asked them how much they had them for they said $1248 plus shipping. Needless to say I'm going to pick them up today. Anyone want a nitrous oxide cheater system??? Brand new 400 bucks!

------------------
67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s