MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   questions about nitrous jets (http://forums.mustangworks.com/showthread.php?t=31095)

spankaveli 11-11-2002 08:19 PM

questions about nitrous jets
 
zex kit only goes up to 125....is it possible to buy jets from nos to get the zex kit up to a 150 shot?

thanks :D

Moxie 11-12-2002 03:35 PM

I doubt it, since NOS and ZEX are competitors. Even if the jets work, NOS is not going to give you any tech help with a ZEX kit. Try contacting ZEX directly.

chris91LX 11-12-2002 04:49 PM

You have to use the Nitrous Express jets, and I was told by Zex you can jet it up to a 200 shot. You can work out the jets you need by looking at the jets for the 75, 100 and 125, they increase and decrease at a set rate for the jet sizes.

Bluefox91LX 11-13-2002 12:39 PM

call the ZEX techline and ask the jetting size for your shot. i use edelbrock jets on my kit, they are fine.

NewAge 5.0 11-13-2002 01:19 PM

depending on the size of the solonoid your only gonna flow so much through it. you can buy 200hp jets but most the smaller solonoids may only flow enough for 150-175 range?? if the kit is entry level NOS it probably maxed out at that range CompUCar maxed out at about 200. dont compromise the TUNE on your motor for more JUICE the NOS solonoid might flow enuff but what if the gas doesnt


All times are GMT -5. The time now is 06:03 PM.