MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Corner Carvers Delight (http://forums.mustangworks.com/forumdisplay.php?f=18)
-   -   Strut to spindle Question (http://forums.mustangworks.com/showthread.php?t=32396)

Cannon 12-17-2002 03:48 PM
Strut to spindle Question
 
If I were to buy a set of struts for my 87-93 spindles, could these same struts be used on 96+ spindles when I Choose to swap at a later date.(that move would be for a brake upgrade in the future).

Thanks!

srv1 12-17-2002 10:30 PM
Re: Strut to spindle Question
 
Quote:
Originally posted by Cannon
If I were to buy a set of struts for my 87-93 spindles, could these same struts be used on 96+ spindles when I Choose to swap at a later date.(that move would be for a brake upgrade in the future).

Thanks!
yes. it is the 86 and older struts that you cant do it with. I am in the process of doing the Cobra conversion.

drudis 12-20-2002 09:01 AM
Yes, and thats the preferred method (versus the reverse of getting 96+ struts which are longer and risk bottoming out).

Coupe Devil 12-23-2002 10:21 PM
So buying a set of struts for an 87-93 and adding the spindles from the 94 up will work.. I was told differently but I trust my sources here much more. I am going to do the cobra conversion on the 86 Coupoe I am building. Just glad to know that the plasn I had will work.

Bradley


All times are GMT -5. The time now is 02:08 PM.