prices for install
 

im most likely going to be getting some stock heads from a friend for free and porting them my selfand putting either 1.6 or 1.7 rockers on them. I figure since to put the heads on i need to take the intake off i might as well get a better on and put it on then too. So obviously im thinking of adding a cam at the same time. What would be a good intake and cam to match up with these heads and what should i expect to pay for install of this? thanks for the input
Ryan

Stock heads with a little porting..........i would say an eldlbrock performer and an e-303 cam

what about the Trick Flow intake would that work well? The only reason i ask this is because i found that intake for cheaper and budget is a concern for this my pockets arnt too deep. I will also be running a 75 shot of nitrous with this set up if that makes a difference to what i should be putting into the car. Also with a new intake and cam would i need bigger injectors with this?
ryan