351 oil pans!
 

I am buying a used oil pan for a 351 in a 95 but its from a fox body (88 I think). Are they the same?

Thanks
Greg

I'm not sure what you mean. Do you have a 95 that your putting a 351 into? Or is it a 88? Either way Canton and Moroso make the good pans for the 351 Windsor swaps. I doubt that the 351 pans differ but I'm not exact.

------------------
Almost done

93 GT, Undecided btw Lentech AOD & Dynamic C4, 8 pt cage, chute,
Sothside Machine bars & Sub-frames, 3.73's
'69 393 stroker w/SRP pistons, Edlebrock Performer heads, Performer RPM Upper & Lower Manifold..Crane Gold 1.6 Rollers Comp Cam..BBK 70MM TB, ceraminc shorties & H-pipe w/cats..30lb Injectors..Cartech Fuel System..etc

I am putting the 351 in the 95. The pan is from a 88.

I think it should fit. You may want to call Saleen. They've actually done it. I'm sure they'll tell you what you need to know.

------------------
351W 89 Mustang GT Convertible

Oh, yeah oil pans,
Hell yes a pan out of a 88 with a 351 should fit without any problems. I pulled my pan off of a Bronco,and my second pan is off of a Fairmout. One thing to remember though the high volume pumps will not fit in the stock pan. So don't waste your time there unless you have a few extra minutes.
I shimed my pump spring up .030" and I have 60 pounds at an idle and 120 at 6800. Remember rule of thumb 10# for each 1000 rpms this is a reccommended minimum.

Idaho Mustangs.

------------------
393,9.5" 351W
830 Holley HP
Victor Jr.
Home made Cool Air Pan
Pro Billet MSD