|
Best Place To Buy A 4" Cowl Hood?????
i want a good price, but dont want to spend 9hours making it fit
------------------ 1988 Mustang GT, T-5 3.08's, No Smog Pump (Shorty Belt), Dumps At The End Of Stock H-Pipe, K&N Air Filter (Stock Air Box), Removed Air SilencerMy Stang My Site (Not Done Yet) |
Quote:
Try cervini, harwood, or HO fibretrends ------------------ 4.10's,long tubes & 75 shot...Goes 12.50's Check it out at http://www.burnouts.stangnet.com 11's coming soon!!!! Heads,intake and cam are all here |
HARWOOD IS THE ONLY WAY TO GO! I ORDERED A 4 INCH COWL FOR MY S-10, SUPERIOR QUALITY! bad as*! SO I ORDERED THE 4 INCH COWL FOR MY STANG TOO. I ORDERED IT FOM JEGS IT WAS $444+$89 FOR THE TRUCK FREIGHT. Total with shipping was $540, remember you get what you pay for. I don't like that 90 truck freight but it is like that from everywhere. See ya.
------------------ 3:55's,BBK Off-Road H-pipe,BBK jet-hot coated equal length shorty headers,BBK 70mm Throttle Body,BBK adjustable clutch quadrant,C & L 76mm Mass air meter,Cobra R's 17x9 w/ 245's,Trick Flow Intake,Flowmaster Force II exhaust system, Super Duty T5,Centerforce II Clutch,Heavy Duty Radiator,9mm Ford racing plug wires,Accel cap and Rotor http://www.geocities.com/i8urvpr/JM.html?987369348700 |
I bought mine from Cervini, and it's awesome, I did not have to make it fit at all, it came perfect! Good luck!! I think besides the rims, hoods are the best look enhancers available!!
------------------ Joe! 1988 GT, 167,000 miles!!! 13.58@105mph Check out my listing! Click here! Or my website: www.joe4speed.com 1999 Ninja ZX-6R 10.32@135mph! 1993 Olds Eighty Eight LSS 16.40@88.8mph |
My vote is for Cervini's also... http://www.mustangworks.com/msgboard/smile.gif
------------------ 92GT all the free stuff and a few bolt-ons, lowered with Ebiach's and Koni's, Kenny Brown subframe connectors, lower G-brace and jacking rails. BBK upper and lower control arms, polyurethane bushings all around and Ken Bell blower, ram-air, 80mm mass air, etc. |
i like the look of the mustang parts specialties 4"cowl, it is on the www.stangparts.com what do u think of it for 375?
|
I recently bought a Cervini's and it's great!
Pic: http://www.geocities.com/oaks56/latest_4_29_01.x ------------------ 351 HO SVO Crate motor, complete (385HP). Victor Jr intake with Barry Grant/Race Demon 750cfm carb MSD billet distibutor, set at 18 degrees baseline for 38 degree max advance at 3500 rpm MSD 6AL sparkbox, adjustable/dial rev control Motorsport Headers, 2.5" off-road H pipe, 2 chamber Flowmasters (very loud) [This message has been edited by EvilHorace (edited 06-04-2001).] |
EvilHorace
Nice CAR!! ------------------ http://home.dencity.com/Mustanguy/PatrickG.JPG Paxton Blown 87GT ICQ#91504337 |
check out ebay.com, I found 2 on there right now for my style (94-98) for around $250-300.. so, much cheaper, hopefully there are some for your style !!
|
hey bowTie Eater, I bought my hood from Stangparts.com. It was the 4" cowl and it measured 5 inches, and looked too big, so I swapped it out for thier 3", which actually measured 2.5", but i am much happier with it.
I paid $300 at a show. I saw it advertised in thier mag. ad for $330 and on the web. If its $375, they recently jacked it up. Its a nice hood. Mine front end needed body adjustments, but after I worked all that out, the hood fits great. ------------------ 1993 GT/AOD '93 Mustang GT |
Man I got screwed! =P Hopefully it's "you get what you pay for." Anyway I'll post pics of mine when I get(supposed to be here Fri.) See ya.
------------------ 3:55's,BBK Off-Road H-pipe,BBK jet-hot coated equal length shorty headers,BBK 70mm Throttle Body,BBK adjustable clutch quadrant,C & L 76mm Mass air meter,Cobra R's 17x9 w/ 245's,Trick Flow Intake,Flowmaster Force II exhaust system, Super Duty T5,Centerforce II Clutch,Heavy Duty Radiator,9mm Ford racing plug wires,Accel cap and Rotor http://www.geocities.com/i8urvpr/JM.html?987369348700 |
Actually, if you want to stay within Canada, J&P Performance sells hoods that are of excelent quality. Give them a call at 416-751-9766 for prices.
------------------ 91 coupe 3.73's,long tubes,2 1/2" exh,ported stock t-body,ProM-77mm cobra intake,edelbrock heads,B303,1.72 rr's 36lb inj's,tremec, & a Paxton NOVI 2000!!! 11.020 @128.95 on BFG Drag Radials (275/60/15) |
| All times are GMT -5. The time now is 03:40 AM. |