MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Modular Madness (http://forums.mustangworks.com/forumdisplay.php?f=17)
-   -   12.5 sec to 12.00 (http://forums.mustangworks.com/showthread.php?t=35112)

sleeper_stang_2000 03-28-2003 10:14 AM

12.5 sec to 12.00
 
Hi all. I have a 2000 Coupe GT with auto trans. Only add-ons are a Bassani X-pipe, Nittor Drags, CAI, Eibach Pro springs and 100 Shot NOS Powershot Nitrous.

Best run @ 3ft above sea level (Moroso) was 12.59 @ 112.4 mph, 2.01 60ft. and 8.20 1/8 @ 88.8mph. Launching @ 1200 rpm and just leavig on drive w/ overdrie off.

Question: From someone's experience, what would it take to get to 12.00 (in otherwords, shave of 0.5 sec)? What would 3.73's do? Chip?

sn95gt19 03-28-2003 10:42 AM

Re: 12.5 sec to 12.00
 
Quote:

Originally posted by sleeper_stang_2000
Hi all. I have a 2000 Coupe GT with auto trans. Only add-ons are a Bassani X-pipe, Nittor Drags, CAI, Eibach Pro springs and 100 Shot NOS Powershot Nitrous.

Best run @ 3ft above sea level (Moroso) was 12.59 @ 112.4 mph, 2.01 60ft. and 8.20 1/8 @ 88.8mph. Launching @ 1200 rpm and just leavig on drive w/ overdrie off.

Question: From someone's experience, what would it take to get to 12.00 (in otherword, shave of 0.5 sec)? What would 3.73's do? Chip?

you'd probably pick up 2-3 tenths from a 3.73, put a stall in it and theres your other 2-3.

sleeper_stang_2000 03-28-2003 10:50 AM

Which type of stall should I get? Know of anyone with a quality part at a reasonable price? Also, this is my daily driver. Please recommend something that is streetable (I drive 70 miles five days a week). Thank you in advance.

Shaggy 03-28-2003 05:13 PM

At 112 MPH slicks and launching on the nitrous should get you damn close. the biggest thing i would work on is that 2.0 60'.

sn95gt19 03-28-2003 09:09 PM

i would just get a small stall....something like 2200-2800, that way you can still drive it everyday.

if you get that 60' down, and hook the car you will probably drop a good 3-4 tenths off your 1/4 mile time

Technick 03-28-2003 10:32 PM

Give Lentech Transmissions a call. They will set you up RIGHT. It is to much hassel to R&I the trans to do a half assed job and then have to do it over or add something else later just so it will handle the H.P. The AODE or later (newer) auto trans are to finicky to be just throwing some parts at. Do your homework and spend the money and do it right the first time. If you do not you WILL spend more money in the long run. Think about what you REALLY want the end result to be with the car. What are the real long term goals? Is it always going to be a daily driver, or is it headed in the direction of a track only car? If you HONESTLY answeer these questions then you will maximize your money without underspending or overspending.

sleeper_stang_2000 03-29-2003 10:46 AM

Thank you all for your advice. I figured the launch is the main issue. I'll let you know what happens. Happy Draggin!


All times are GMT -5. The time now is 11:31 AM.