MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Small Ponies (http://forums.mustangworks.com/forumdisplay.php?f=9)
-   -   yet another problem??? (http://forums.mustangworks.com/showthread.php?t=35268)

whitepony 04-03-2003 09:50 AM

yet another problem???
 
my 88 gt has a small backfire in the upper and lower intake when i step on it, does anyone have any idea of what it is??

i fixed my laste idel problem thanks to you guys!!

Dark_5.0 04-03-2003 03:07 PM

I would say that you are either running too much timing or you have a carbon build up problem.

How about some more info,

whitepony 04-03-2003 06:56 PM

reply
 
i dont think it would be carbon because i just rebuilt it all and have not yet had a chance to run it for a long period of time
but my timming is set at 14%
i set it there because it ran good there before, it ran the best there.

nuice car by the way

84LX89GT 04-04-2003 01:26 AM

Are you sure the timing belt sprockets are lined up correctly. You can have an engine run fine (but with a slight loss of power) with the belt off a tooth. This will cause backfiring and since you just rebuild it, that would be my guess, luckily 2.3L engines aren't interferance engines, so if it's the case, there's likely no harm done.

whitepony 04-04-2003 01:07 PM

reply
 
well i put a grea drive in it and read threw all the instruction and had my dad who is a mechanic look at it so i know that the gear drive is in right
i thought iot might be because its running lean and the computer is not getting it so may be need a different chip put in but iam not sure.


All times are GMT -5. The time now is 09:55 AM.