vibration found
 

I hve been to hell and back with my vibrating shifter above 70. I finally found the culprit.. the wrong flywheel!! It seems when I had my rear main seal replaced the shop must have replaced the flywheel with the wron ounce weight. I still have a very little vibration at about 80 but it not the shifter.

------------------
88 GT mass air conversion from 90lx, Cobra Intake(ported/polished lower),Edlebrock Heads(ported/polished),24# injectors 70 mm BBK TB, 73mm C&L, 347 SB, Wolverine custom cam, 150 shot Nitrous, BBK 1 3/4 long tubes, BBK off road H pipe, Dynomax cat back, alum driveshaft, Konis,Southside Bars w chromemoly torque boxes, 4.10 with Auburn diff, SVO springs, subs, cross drilled rotors,MSD A6 w ign retard, black magic fan etc.

That's why i do all of the work on my car in my garage http://www.mustangworks.com/interact...board/wink.gif Can't mix up fly wheels if you only have 1. Light Em Up!!! http://www.mustangworks.com/interact...oard/smile.gif

Hey man...glad to hear that really was the problem.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

o man..i hope you yelled at them..hopefully it didnt do any internal damage

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..

Yeah....XLR8R's right. Don't get TOO pissy though. I'm not a mechanic (yet) so I can see if you're working on a bunch of cars at once it'd be easy to get confused. BUT you're paying them to do the job right and at the least you should expect them to pay for the new flywheel and whatever costs you incured installing it. That could've done some real damage if it'd stayed in there for a while.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s