MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)

- Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)

- - WALBRO part #? (http://forums.mustangworks.com/showthread.php?t=3639)

I pulled the fuel tank out of the '93 to put the pump from the '86 in, and the guy already had a WALBRO fuel pump in it. (this thing is full of surprises) Can any body tell from the part # what pump this is, or give me a website to check? On the side of the pump it had:
WALBRO F23U-9350-A2A
AOF289
3549-18
Any help would be appreciated.

------------------
93 GT, CCM long block, GT40P heads, Crane 2031, 1.7 RR's, Moroso cold air, Cobra intake, 65mm TB, 73mm Vortech, 24# injectors, MAC GT40P headers, 2-1/2" BBK H-pipe (w/cats), 3.55s, B&M Ripper shifter, Black Magic fan

My stock fuel pump was a walbro.

Crap! I do not want to pull that tank out again http://www.mustangworks.com/msgboard/mad.gif How much HP will the stock fuel pump support?

I don't remember exactly what it will support, but our set-ups are pretty close. I was told by many people to get a bigger pump. I run 24#'ers with a 190 pump 39 on the pressure gauge and at WOT I am not pegging lean on my A/F ratio gauge.