World Products Windsor Sr. Lite Heads
 

http://www.mustangworks.com/msgboard/confused.gif I know the specs of these heads, but I was wondering if anyone out there has any experience with these heads. I don't want to buy them if they're not going to be reliable. Any opinions would be greatly appreciated.
Thanks in advance,
Dave

------------------
Dave & Robin 88 GT, T5
306, polished crank, TRW pistons, underdrive pulleys, cold air induction, 73mm MAF, Xtreme Energy Cam, 3.73's, 5 5/8 unequal length headers, MAC H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch

I take that as a "NO".

------------------
Dave & Robin 88 GT, T5
306, polished crank, TRW pistons, underdrive pulleys, cold air induction, 73mm MAF, Xtreme Energy Cam, 3.73's, 1 5/8 unequal length headers, Offroad H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch, Steeda adjustable clutch cable with firewall adjuster

I have windsor sr. aluminums on my block, and i like them!

------------------
1989 mustang GT mildly modified,windsor sr.heads,TRW 10:90 flat top pistons,Flow tech headers, Manley vlaves, flowmaster exhaust,pro dumps,hotchkins upper and lower control arms, ebiach springs,koni shocks,pro5.0shifter,chrome moly weld in subframe connectors,new interior now a 2 seater,8pt chrome moly roll bar and HAL K-member,coilovers,castercambers,Auburn Pro Locker,3:73's Strange SS racing Splines 31 tooth c-clip eliminators.
Mass Mustang Club

I am using the Dart Sr heads the springs and retainers didnt last 1500 miles put better springs in problem solved!

Thanks Gents. That's all I needed to hear.
Dave

------------------
Dave & Robin 88 GT, T5
306, polished crank, TRW pistons, underdrive pulleys, cold air induction, 73mm MAF, Xtreme Energy Cam, 3.73's, 1 5/8 unequal length headers, Offroad H-pipe, 2 chamber flowmasters, turn-downs, King Cobra Clutch, Steeda adjustable clutch cable with firewall adjuster