flywheel horsepower guess.
 

what hp\trq do you think this makes

302 block 4bbl 650 cfm vaccume sec holley
edelbrock performer intake
mild ported 302 stock heads
headman 3inc headders 2 1/2 custom exhaust
stock cam and valvetrain
msd box 6a with coil, msd 8.8 wires
distributor racing advance springs

motor runs really stong with lots of low end torque.
what do you think im running?

just trying to see where i stand so i can compare later with my heads and cam.

I think it would be total shot in the dark to guess. You will have to get some kind of number, from either a dyno, G-tech, drag timeslip , something like that. Then you have something to compare to.

Having said that.... heres my shot in the dark....
250 torque and horse power. Let me how far of I am!

Without cam specs or compression ratio, it really is a shot in the dark. I'm guessing with Gofast around 250, maybe lower.

Get some 1/4 mile numbers and use the "Analyzer" section of this website to get an estimate.

i would say between 230 and 250 hp. with the right cam and better heads you would be looking at about 300.