Need some opinions!
 

If I were to get a set of box stock Trick Flow TWs, what would be the best overall off-the-shelf-cam with the stock pistons. By overall I mean which one would work good naturally aspirated and also work well with a blower or nitrous. For example...Which would be the best between the E303,F303, or Stage 1 Trick Flow cam? How well would the Trick Flow cam work with a supercharger or nitrous? How about the Wolverine 1190, 1087, or Crower 512? Any input would be appreciated, and suggest a cam other than the ones I have listed if you think it would be better suited.

On a side note I already have a GT-40 intake and 3:73 gears.

BTW...What head gaskets are you Trick Flow TW guys using? Are you guys going with the standard Fel-pro 1011-2 or with a Graphite gasket?

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99

Anyone?

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99

Let's try this again, ttt.

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99

I have the Anderson B2 cam in my 302 with ported TFS heads. The signature says it all for me!

------------------
ONLY 325 RWHP??? DAMN...

I'm not real familiar with the AFM cams, does the B in B2 mean it's a blower cam? What are the specs (lift, duration, lsa,etc..)? How close was p/v clearance?

------------------
1989 lx notch
89,000 miles
bolt-ons,stock heads/cam
60'- 2.07, 8.90@78, 13.93@99