MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   fuel filter between the PCV and intake? (http://forums.mustangworks.com/showthread.php?t=37714)

Bad89stang 07-05-2003 03:49 AM
fuel filter between the PCV and intake?
 
Which fuel filter is best to use for this trick? I am going to try it and see if it cuts down on the oil in the upper intake. There are so many different types and sizes of fuel filters. Which one is best for this application?

Intake is a Performer 5.0. PCV and screen are new.

LX XLR8R 07-05-2003 02:37 PM
i used a clear spectra cheap one from AZ..that and make sure your PVC is good and that when you put that intake on you did swap over the oil baffle under the metel screen

Bad89stang 07-05-2003 04:59 PM
Quote:
Originally posted by LX XLR8R
make sure your PVC is good and that when you put that intake on you did swap over the oil baffle under the metel screen
Read my post again:D

Thanks for the help

Mach 1 07-05-2003 05:03 PM
he asked about the baffle, which you didnt mention. the metal plate that goes under the intake. You shouldnt have oil problems going to the TB, so you shouldnt be adding a filter there. Your looking for a band aid instead of figuring out what the real problem is.

Bad89stang 07-05-2003 05:08 PM
My bad. It already came with the baffle in place.


All times are GMT -5. The time now is 11:03 PM.