keepin cool
 

I have a worked 347 w 160 thermostat and electric fa. When it's below 85 my gauge stays below 1/2 way when the temp hits 90 or at the track it'll climb to 3/4. will a high flow water pump help keep things cool?

------------------
88 GT mass air conversion from 90lx, Cobra Intake(ported/polished lower),Edlebrock Heads(ported/polished),24# injectors 70 mm BBK TB, 73mm C&L, 347 SB, Wolverine custom cam, 150 shot Nitrous, BBK 1 3/4 long tubes, BBK off road H pipe, Dynomax cat back, alum driveshaft, Konis,Southside Bars w chromemoly torque boxes,AOD w lentech valve body, B&M MegaShifter, 4.10 with Auburn diff, SVO springs, subs, cross drilled rotors,MSD A6 w ign retard, black magic fan etc.

I was in the same boat with my 347. I am now using a 3-core radiator, 17in permacool fan, electric fan in front of radiator, 2 quarts of engine kool, 160 thermostat. I just got mine under control by putting back on my stock waterpump pulley instead of the underdrive waterpump pulley. Rick91gt told me some info on where to get a high flow water pump for only 69 dollars. I am sure this will help with your heating problems.

------------------
347 Stroker Motor: Balanced, Cobra Transmission, Extrude Ported and Polished Upper and ported Lower, GT40 Milled Ported and Polished Heads, B303 Cam, BBK 1 5/8 Headers, 30lb Bosch Injectors, Holley AFPR, March Underdrive Pulleys, Perma-Cool Fan, 3-Core Radiator, Accel Performance Coil, Accel 300+ Racing Wires, Ram Air, K&N Filter, 73mm Vortech MAF, 70mm TB, FlowMaster Exhaust w/BBK Offroad H-Pipe, Hurst Shifter, 3:55 Gears, Ram Clutch, Cross Drilled Rotors, AC del, rear seat del.