MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   Help! (http://forums.mustangworks.com/showthread.php?t=39534)

Scrapla 10-07-2003 08:20 AM

Help!
 
My clutch cable came off the quadrant and the grommit in the fire wall rotted off so its just a hole there now nothing to really hold the cable where can I get a gromit like that? Also where is the quad. located under there where the pedal assebly is cause I had a bbk metal one installed when I had a tranny rebuild so I dont know where or how to fix this, any suggestions would help thanks.

billheis 10-07-2003 09:17 AM

The bushing comes on the cable and Idon't know if its availble separately. Try Steeda or UPR Products (theyre both in S. FL) for a new adjustable cable. when you get the new cable, put it through the firewall first and put the end over the hook on the quad first Its way up there but laying on your back with some light you can see it. The adjuster part is down at the trans.
Bill

Scrapla 10-07-2003 05:58 PM

Well the cable is fine, and nothing snapped it just came loose from under the dash I just dont know where it goes.

billheis 10-07-2003 10:15 PM

You gotta stand on your head but when you look up there youll see on the quad right at the end where it gos. Just take the cable loose fron thetrans end and hook the cable on (if you have a friend to help, have them pull on the cable once you have it hooked) then adjust the cable

Scrapla 10-09-2003 12:43 AM

I got it, I used a rubber gromit from pep boys along with what was left of the stock one, but after all that trouble of messin with the cable and fixing the gromit I goto open my door and the handle snapped off LOL


All times are GMT -5. The time now is 07:39 PM.