Tire size?
 

Hey gang, I have an 87 GT with the original stock rims on it. Does anyone know what the biggest tires I could put on the back are? Also will anything wider than 60's fit those rims? Thanks.

------------------
Phil -- 87 GT, T-Tops, 5-Speed, BBK Cold Air, Factory AC Delete, Flowmaster Force II Catback, Subframes, 3:73's

I'd say 275/50/15, but there'd be lots of tire bulge.

If you're gonna put big tires on the stock rims, you should probably stay around 245/60/15 or 245/50/15 (if they make that).

If you get 15x8" rims or anything bigger(preferably a little wider than 8, like 8.5 or 9"), you can get the BFG 275/50/15s (for back).

-----------------------------------------
'79 Mustang Coup w/ 4" Cowl
Stock 5.8L, C4 w/ shift kit
Holley 750 cfm, Edelbrock Performer RPM intake
1 5/8" MAC shorty headers, Al driveshaft
2.5" Off road H-pipe, 2-chamber Flowmasters
Front: 225/60/15, Rear: 255/60/15 Eagle GT II
Weld wheels (15x6;15x8), 8.8" Rear w/ 3.55s
14 x 4” K&N air filter (getting the Xtreme setup someday) http://www.mustangworks.com/msgboard/cool.gif

"Red, thou art my companion. Hasten now your quickened metamorphosis to
Green that I may conquer all who dare abide there beside me. May they be left
thither behind burnt black." ---Fox Body

Thanks Fox Body, the 245's sound good. Don't have money for new rims right now and I don't want the tires to bulge. I guess the most important thing I was wondering is if 50's would fit those rims? Also if they would rub or most importantly look stupid cause they stick out. Would 50's stick out of the fenderwell? Thanks.

Copper makes a 265/50/15 they work good I had them.

------------------
1988 LX 5.0 3060lbs (full Tank) 14.90@100.2 On a Gtech
Drivetrain: 2.73 Stock Gears (New Gears coming in a week), World Class T-5, Lakewood Bellhousing, Summit Adjustable Cluch Quadrant & Cable, Alumminum Driveshaft, Flaming River Manual Steering Rack
Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks
Engine: Steal Mounts, Ram air, K&N, Under Drive Pulles
Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\bac

yeh, cooper cobras in a 265/50/15 fit great , are quite inexspensive, and do a half decent job of excellerating to.

The 50 Is the hight are you talking about width That is the 1st #265 the 50 is a % of the width. I hope I did not confuse you more http://www.mustangworks.com/msgboard/smile.gif

[This message has been edited by Stang Runner (edited 06-23-2001).]

Thanks guys, I understand the number thing better now. I'll look into the coopers.

------------------
Phil -- 87 GT, T-Tops, 5-Speed, BBK Cold Air, Factory AC Delete, Flowmaster Force II Catback, Subframes, 3:73's