Will this get me by?
 

I have the following...
38 pph injectors,fmu,pro m calibrated for 38 pph injectors,inline fuel pump, 3 core intercooler, and my signature below. Would I need anything else to install the procharger?
Thanks

With 38lb injectors you could probably stay away from the FMU. If you can ditch that FMU it would be best.

I was planning on running larger injectors w/o the fmu - say 42`s later. I have the 38`s right now and the air meter for them.The Procharger is pullied at 14lbs - 38`s sounded too small for it to me. Also I`ve got my stock ignition still, would I have to upgrade the ignition system before the blower install?

Ignition box will help but either way your going to need to gap the plugs at .032-.035 to stop spark blow out. 38lb injectors should be fine.

I took my car to the shop and they said all I needed was a race bypass and some little stuff. Other than that I`ll be ok.
Thanks for the replies

I hope that little stuff was a ignition box and or a boost retard.

Actually, yes and no. I am getting an ignition box and I already have a boost retard. By little things I mean - stock pullies, a\c bracket, stuff like that