How can I identify my heads?
 

How can I tell what kind of heads I have?

Examine them closely and look for a part number that will probably start with an "E" or a "D" but a "C" is also possible. The letter denotes what decade they were made in (E=80s, D=70s, C=60s). If you email or PM me with the number I can tell you what they are.

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

Do I need to have them out to find it the only thing I see is the #12?


------------------
1988 LX 5.0 3060lbs (full Tank) 14.90@100.2 On a Gtech
Drivetrain: 2.73 Stock Gears (New Gears coming in a week), World Class T-5, Lakewood Bellhousing, Summit Adjustable Cluch Quadrant & Cable, Alumminum Driveshaft, Flaming River Manual Steering Rack
Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks
Engine: Steal Mounts, Ram air, K&N, Under Drive Pulles
Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\bac

Do you think they are not stock??
Your car came w/ E7TE heads.

------------------
4.10's,long tubes & 75 shot...Goes 12.50's
Check it out at http://www.burnouts.stangnet.com

11's coming soon!!!!
Heads,intake and cam are all here

Generally speaking youshould able to find the part # on the underside of the heads. Sometimes you can find them on top under your valve covers. NOS_Notch is right...if they're stock they'll be E7TEs. Fords part numbers are pretty easy to break down too. E7TE breaks down likes this:

E=decade...E is the 1980s

7=year in the deacade...so 1987

T=line of Ford they were built for...T is actually Ford's truck line which means the heads were originaly designed for use on trucks. The Mustang line code is a "Z".

E=Engineering group...in this case "E" means engine part

------------------
1984 1/2 GT350 (#842 Hatchback w/ T-tops), 302HO, Comp cams Xtreme Energy cam, Carter 625cfm carb, Weiand Stealth intake, MSD distributor, MSD coil, FMS 9mm wires, 1 5/8" MAC unequal shorties, 2 1/2" MAC Prochamber H-pipe, Flowmaster 2 chambers, KYBs, 16"x8" 4 lug Cobra Rs, Falken 245/45ZR16s

I took off the valve covers And found 8C8 on them are they stock??????? I think It is ?C8 the frist one might be a B or a 6 Man it is hard to tell!!

[This message has been edited by Stang Runner (edited 06-24-2001).]