Need stock HO parts
 

Anyone know a good place I can find some stock HO parts? I need headers,exhaust,heads,upper and lower intake and some other stuff.
Ebay never has anything useful.If anyone in here has some stuff sitting in the garage let me know. I would really like a cheap set of stock headers and maybe exhaust to slap on to a 87 150 horse 5.0

------------------
Rob meister
89 Mercedes 190E 2.6
87 Lincoln Continental
Ex 86 Mercury Cougar

Linc: I have some stock headers, and a few other things just sitting in my garage after my exhaust over haul, the shop tossed my exhaust, but I have everything else. Just let me know if you want them, they are rusty, but very solid and would clean up with some work. I was keeping them in case I decided to sell my car, and keep my mods, but it would now cost me more to return to stock than to sell as is...Just write back in here, or via-e-mail...Thanks and good luck

------------------
91 LX Convertible Gray on Red B&M Shift improver kit, March underdrive pulley's Richmond 3.73 gears, 1 5/8 Flowtech long tube Headers and off road h-pipe, Flowmaster 2-chamber cat-back with S.S exhaust, MSD 6A Ignition with coil,Cap and rotor, Taylor Pro wires, K&N 12" conical filter system, Jet stage 2 performance chip and Lentech Street Terminator plus on it's way...just ordered some new Red alum pulley's. Doing some big shopping of late, I will keep you posted.

Well, I have the stock upper and lower intakes off of my '89 Gt. I also have the stock heads off of my Gt. They have 117,000 miles on them, and are clean. I had no problems at all with the car when I rebuilt the motor..I just wanted to change it from a fast car to a REALLY REALLY fast car. Know what I mean?? Let me know if you are interested. Josh

------------------
*************************
'89 GT, T-5,
Bored .030 Over, GT-40P heads, MAC 1 5/8" headers, MAC Off-Road H-Pipe, 2 1/2" Flowmasters, Edelbrock 65mm T.B., Trick Flow Intakes, Crane 2031 cam, 1.7 Roller Rockers, Keith Black hyp. flat top Pistons, Screamin' Deamon Coil, Champion Plugs, March Underdrive Pulleys, 255lph Fuel Pump, SVO Motorsport Clutch, Adjustable Fuel Pressure Regulator, Formula GP Suspension, MAC Upper & Lower Control Arms, FMS 3.73 Gears.
*************************

I have a stock H-pipe from a 91 GT. The cats are in good condition and my car passed emissions when they were on. Im not sure how much something like this would be to ship, but if you are interested email me at buono@optonline.net

------------------
1992 GT 5.0L Convertible
BBK Shorties
All Power
Super Chip
Mass Air

I have same equipment as Quick89gt with stock throttle body and heads. Let me know if interested.

------------------
88 Pro Street GT, 351 crate (385 hp), ported X heads, Novi 2000, Aftercooler, MAC 1 3/4" headers, AFM PMS/Powerpipe, #50 Holley inj., Triangle Eng cells, Paxton fuel system

I'm trying to keep up with all your posts http://www.mustangworks.com/interact...oard/smile.gif
and I have e-mailed you all so far but if anyone has not received an e-mail from me
"squeaky81@aol.com" then send me one so I can reply to ya! thanks guys

------------------
Rob meister
89 Mercedes 190E 2.6
87 Lincoln Continental
Ex 86 Mercury Cougar

I also will have stock heads/intake/t.b. for sale.......but being from minnesota the shipping would be higher.

Anyone know the best place to go to ship an H-pipe? I dont want to get killed with shipping charges.

Scott

------------------
1992 GT 5.0L Convertible
BBK Shorties
Flowmasters
All Power
Super Chip

I sent you a e-mail http://www.mustangworks.com/interact...oard/smile.gif

------------------
My Ride Check Out My Site 91GT, Holley SysteMAX II Kit-Heads 2.02" x 1.60",Full MAC exhaust 1-5/8" Long tubes, 2-1/2" O.R H-Pipe, 2 1/2" cat back, 12" K&N Filter, RNH PERFORMANCE Ram Air, Ron Davis Radiator, Full Suspension,3:73's, Welds, Best on new motor-12.60 @ 108, no traction 1.98

once again I e-mailed everyone who has responded to my original post. if you have not recieved an e-mail from me please e-mil me at "squeaky81@aol.com" or reply tyo the post again. Thanks!

What do you still need? I have lots of stuff.

------------------
1995 GT Black sleeper
Edelbrock 6037 heads,Edelbrock proformer intake,Edelbrock cam, 70mm TB,75mm pro-m mass air,Taylor wires, Underdrive pulleys,Equal length headers,K&N filter
Flowmaster cat-back, Eibach pro rate springs
lower control arms
3.73 gear Centerforce clutch



[This message has been edited by mustang17 (edited 01-20-2001).]