MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)

- Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)

- - 351 from a bronco (http://forums.mustangworks.com/showthread.php?t=41011)

351 from a bronco

I have a stock 88 5.0 Would it be possible to take a 351 from a bronco, put my stock heads, inake and exhaust on it. What else would I have to do what problems would i run into? Is it worth it to do? Will my 5 speed trany bolt on?
Thanks for any help

Re: 351 from a bronco

Quote:

Originally posted by StateTroopCoupe
I have a stock 88 5.0 Would it be possible to take a 351 from a bronco, put my stock heads, inake and exhaust on it. What else would I have to do what problems would i run into? Is it worth it to do? Will my 5 speed trany bolt on?
Thanks for any help

\

No, or at least you can't bolt on your intake and headers. The 351 has a taller deck and the block is wider. You can bolt on your 302 heads after you bore out the holes from 7/16 to 1/2 but why?
You can bolt in the complete 351 into your Mustang though:D
There will be some work involved to get this done.

Full length 5.0 headers will bolt on but most likely will also hit the firewall or floor. Shorty headers might work with a new (custom?)H pipe.