Crankshaft pulley spacer
 

Does anyone have a fluidamper and use the crank spacer? I have a fluidamper and I need the crank spacer. Does anyone know exactly how thick it is? I thought I read somewhere that it was .350 thick, but I can't find where I read that at. Can anyone shed some light?

Dont know if it will help, but I have a spacer on my FRPP balancer.
http://www.dariusrudis.com/mustang/a...C01598_JPG.jpg

I run a Fluidampr and had to get the spacer as well. I believe it's a .645" spacer. I called March Performance Pulley's and as soon as I said I had purchased a Fluidampr the guy said "..and so you need the spacer? No problem."

It was like $60 for the spacer! :eek:

Just give March a quick call at (734) 729-9070.

E

Thanks for the replies. I put my pulleys on and just measured with a tape measure about what the difference was. It looked to be about 5/8". I machined one out and made it .645 as you suggested Eric. Works like a charm. I could post pics if anyone is interested. I had read that the spacer was .350 thick at jegs.

Good to hear, man.

Glad it worked out for you.

E