Cylinder Head ???
 

I can get another deal on a set of heads kind of like the one I got with the holley systemax heads. The only thing is that I'm not sure how well they would work. Here is the info that I've gotten from the machinest that made them. They have hardened seats with bronze guides, 58cc fast burn combustion chambers,3 angle valve job, new springs, locks, screw in studs, manley valves. Midly ported and polished. But my concern is with the size of the valves. The intakes are 1.90 but the exhaust are only 1.50. How well will a car with lots of intake but low exhaust run? They have zero miles on them and the machinest is trust worthy.

------------------
67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s

well, if there is anything you need to improve on a set of small block ford heads...it's the exhaust.
The rest is pretty good....exhaust needs help.




------------------
'88 coupe...stock as a rock.
Check out http://www.burnouts.stangnet.com

11's coming soon!!!!
Heads,intake and cam are all here

So your saying that the heads aren't at a big advantage over a set of stocker ones? Therefore it's better to look for a set that has 1.60 exhaust valves?

------------------
67'fastback-Edelbrock carb,intake,cam,valve springs.Rhode lifters, CompCam rocker arms, windage tray,cerama coated headers,dual flows with H-pipe, modded c-4,tci stall converter,perma cool electric fan,aluminum water pump,griffen aluminum radiator,accel 8.8 cable,wide cap distriburator,magnetic pick up,v-matic hurst shifter,edelbrock performer nitrous, carter electric fuel pump,ignitor coil,solid motor mounts,magna racing suspension,poly urathane bushings,under rider traction bars, comp. eng. s

if they arent expensive, they're gonna be better than stock... 'specially if they've been ported some... fwiw, the stock exhaust valve is 1.45..

------------------
84 convt,'95 302,AFR's, performer
3.55's, underdrives BBK shorties
stock cam, 1.7's
13.85@102.5
and a '68 stang that WAS nasty ;-)