Best Intake is What??
 

Edelbrock Performer RPM does any one know how mush it flows?? I will be putting it on a 351w Is there one that flows better??

------------------
1988 LX 5.0 Was 3060lbs (full Tank) 14.65@101.3 On a Gtech Drivetrain: 3.55, World Class T-5, Lakewood Bellhousing, Adjustable Cluch Cable, AL Driveshaft, Manual Steering Rack Suspension: MAC Control Arms,Maximum Motorsports Front Grip Package, H&R Sport Spings, Bilstein Shocks
Engine: Steal Mounts, K&N, Under Drive Pulles Exhaust: 1 5/8 Un-Equal Length Mac Headers, X-pipe W\cats, Edelbrock cat\back Cooling:3 Core Radiator,

Edelbrock RPM? Are we talking carb intakes? That will not work if you mean for a fuelie, 5.0 intakes aren't interchangeable with 351W's. Try TFS for that.

------------------
'91 LX Hatch, 17 ROH ZR6's, lowered, 3.73's, offroad H pipe, SN Cobra cat-back, ASP pullies, 14° timing, C&L 76mm MAF, 170A 3G, B&M Ripper on a T5
1991 LX Hatch 5.0L

yes it is a EFI and yes it can go on a 351, upper is Edelbrock Performer RPM and get a lower truck 351w from Edelbrock Thanks for pointing that out.
I wrote it late last night http://www.mustangworks.com/msgboard/smile.gif
Ok I found out how much it Flows after Extrude-Hone 290 cfm

[This message has been edited by Stang Runner (edited 07-13-2001).]

Out of the Box flow numbers straight from a 5.0 mag
Performer: 215cfm
Performer RPM: 231 cfm
Victor Jr: 283 cfm
Victor: 294 cfm
Cobra: 205 cfm
GT-40: 212 cfm
TFS Street: 243 cfm
TFS Track: 257 cfm
TFS R: 279 cfm
TFS 351: 271 cfm
Holley: 268 cfm


------------------
Dustin
Saleenized 89 GT,428 rwhp,TFS Street Heat Intake,TFS TW Heads,TFS #2 cam,BD-11A 9 psi,FRPP 1.6 rr's,BBK 70mm TB,Pro-M 75mm Bullet,MSD 6BTM, FMS 9mm wires,BBK longtubes,BBK Short H-pipe,American Thunder cat back,3.55's

12.3@119

http://www.mustangworks.com/rides/pictures/Listing1549-slot1.jpg

Hey Thanks SaleenGTS for the ## Looks like I will get the TFS 351: 271 cfm and have them Extrude-Honed