need wiring help.
 

Does anyone have, or know were I can get a wiring diagram for the turn signal switch for a 88. I pulled out the old harness, and I'm trying to get just the headlights, brake lights, and turn signals to work. I think I have the head lights and tail lights figured out, but I need to know what color wire goes to what off the turn signal switch. It has a lot of wires coming out of it, and I most likely need only a couple of them. Just which ones. This car was a 88 2.3 I bet I've reduced at least 10lbs of unneeded wiring off it. I looked at painless, and centect but found nothing. I don't want to buy a replacement kit because it will have a bunch of wiring that I don't need. Thanks.

Re: need wiring help.
 

I have the Ford Repair Manual with the schematic/diagram of the multi function switch. It illustrates what prong corresponds to what signal. From that you can infer what wire does what.
Let me know what you want...

Re: need wiring help.
 

I guess to get my headlights, tailights, brakelights,and turn signals working, I just need to know which pins on the multifunction switch do what? The old wiring was a complete mess. So I thought I could just get the lights working, being this is going to be a strip only car. Thanks for any info you can give.

Re: need wiring help.
 

Here you go...from the manual looking at the switch from the driver's seat...

Re: need wiring help.
 

thanks alot, that is what I was looking for. Thankyou.