3 1/2 draglites
 

alrite guys, on my car for the front 3 1/2 wheels to fit iv'e noticed that i need to shave the front calipers to get them to clear, as member moponys has mentioned in my last thread....my question is, what in the world should i use to shave or grind them a little bit so they will seat properly? i apreciate any response!!!

Re: 3 1/2 draglites
 

Can use either a dremel or a grinder. Which ever you have available will work, the dremel will just take longer.

Or if you're really desperate use a metal file, and I mean really desperate for this one. :D

Re: 3 1/2 draglites
 

Why not use a thin wheel spacer?

Re: 3 1/2 draglites
 

That is a hell of an idea! thanx for the response mufflerboy.

Re: 3 1/2 draglites
 

Use a hand held grinder to do it...you'll also need wheel spacers. If you don't use wheel spacers, you're gonna have to grind down a LOT more.