MustangWorks.com : Ford Forums

MustangWorks.com : Ford Forums (http://forums.mustangworks.com/index.php)
-   Windsor Power (http://forums.mustangworks.com/forumdisplay.php?f=8)
-   -   331 Stroker, What piston to use (http://forums.mustangworks.com/showthread.php?t=45342)

lucheski 02-08-2005 03:41 PM
331 Stroker, What piston to use
 
I just got a 331 Stroker Crank.

Can I use a standard 302 Piston with a 3.25" stroke crank and 5.4" rods in a stock block? I want to get my final compression to about 11.5:1, without spending 700bucks on pistons. Can this be done in the 300-450range with a hypereutectic piston?

All suggestions welcome, thanks

~The Jester~ 02-09-2005 04:57 AM
Re: 331 Stroker, What piston to use
 
That ain't gonna work. With the parts you have listed there, you need a piston with a compression height of 1.175" Stock 302 pistons aren't gonna work. Keith Black, Probe, are gonna be your best bet for reasonable priced hypers.

Good Luck! :D

FordMainiac 02-11-2005 07:23 PM
Re: 331 Stroker, What piston to use
 
ive found that DSS sells ther pro series pistons for 329 and they sell ther prolite pistons for 399 so i would go with them.


All times are GMT -5. The time now is 10:51 AM.